At Restoration Design, we love to help fellow Porsche fans with their own restoration projects! In this video, we address the suspension console installation of a 1973 Porsche 914.

Up to this point, we’d done a lot of work on this restoration project:

• New floor from front to back
• New pedal cluster bracket
• New section of trunk

Before you embark on any restoration project, make sure you make a note of the new parts you have. When you take your Porsche apart, be careful not to throw out any parts that you might need to put it back together.

When we got to the suspension console, we made sure to get rid of all the spot welds and clean everything up. We also took the opportunity to put a rust-prevention product on the area that’s covered by the suspension console.

Make sure to clean up any areas that you’re going to be welding on. Then, cover these parts with a weld-through primer to prevent future rust.

We always pre-drill our holes, and we did this for the suspension console and coated it with weld-through primer.

Watch the video to see the rest of the suspension console installation.

Leave a Reply

Your email address will not be published. Required fields are marked *

Post Navigation